BLOG

Pepperl+Fuchs Bebco EPS 6000 Purge System


Pepperl+Fuchs announces updates to their Bebco EPS 6000 Series Purge System. These updates include:

  • Modified control unit housing
    • Square housing with larger lid to provide a tighter gasket seal.
    • Manifold is now easier to access, remove and install.
    • Option to use metal cable glands for IS entries.
  • Redesigned EPV vent
    • Slotted vent cap allows for a more accurate flow rate.
    • New Type 4X/IP66, plunger style, EPV vent for bottled gas or low flow, capable of purging at 2 SCFM.
    • Improved connector end requires only one gasket to improve leakage.
  • Updated certification to the latest standards of ATEX, cUL and CSA.

The 6000 series consists of the control unit (EPCU) and user interface (UIC) mounted in a 316L stainless steel Type 4X (IP66) enclosure with the pneumatic solenoid valve mounted on the unit. The EPV-6000 relief vent is separate and is mounted to the enclosure.

The user interface allows programming of up to 4 switch inputs, temperature modules, enclosure power contacts, 2 auxiliary outputs, and various operational functions. Also, the user interface screen allows monitoring and easy configuration.

Among the additional features are inputs for system bypass, enclosure power on/off, temperature overload and activation of Rapid Exchange flow for cooling or auxiliary relay for separate cooling source, and delay power shutdown. Component kits are available for custom installations.


Pepperl+Fuchs Bebco EPS 6000 Purge System

Pepperl+Fuchs Technical Datasheets