SMC Corporation of America’s ZGS Series Vacuum Gripper System (Foam Type) is suitable for the palletizing and depalletizing of corrugated cardboard, etc. It combines all functions required for adsorption Ejector unit (Ejector, Supply valve/Release valve, Silencer, and Pressure switch). With its easy setup, it can be used immediately by simply connecting 1 electrical cable and air piping. Weighing as little as 3.9kg, the ZGS Series reduces the load on robots. When workpiece drop occurs, the vacuum saving valves are closed and the vacuum pressure in base plate increases. Two suction plates can be selected according to the workpiece size. The Vacuum Saving valve type significantly suppresses vacuum pressure drop when used with multiple workpieces or when workpiece is smaller than the suction plate. The Fixed Orifice type is suitable for use with workpieces that are approximately the same size as suction plate.
FEATURES:
- Foam Size: 400mm×240mm.
- Number of holes: 91.
- Foam Thickness: 20mm 30mm.
- Theoretical lifting force: 2144 N.
SMC ZGS Series Vacuum Gripper System (Foam Type)
SMC Corporation of America Technical Datasheets
