Banner DF-G2 Fiber Amplifier

Specialized firmware delivers superior ease of use and simplified set-up right out of the box. With the totalizer enabled, you can set a fixed number of detection events per output pulse.The output triggers once when the total is reached. An off-delay can also be used to address PLC scan time delays during high speed counting.

  • Unique firmware designed to achieve accurate, high speed, low contrast performance for small object detection applications 
  • Percent-based threshold selectable from 2% to 50% for sensitivity adjustment 
  • Automatic Gain Compensation (AGC) algorithm compensates for dust build-up on fiber optics to extend counting cycle and maintain count accuracy 
  • Intelligent Dynamic Event Stretcher (DES) minimizing chance for double-counting, even with non-uniform objects (i.e. gel caps, washers, etc.) 
  • Alarm output provides notification upon extended block condition and marginal signal condition 
  • Totalizer feature allows user to configure output after certain count value is achieved 
  • Three TEACH methods include Window TEACH, Light Set TEACH, and Dynamic TEACH 
  • Fast response speeds of 25, 50, 150, 250, and 500 microseconds 
  • Easy to read dual digital displays show both signal level and threshold simultaneously 
  • Simple to use interface for easy setup and programming 
  • ECO (economy) display mode reduces amplifier power consumption by 25%