Easily distribute I/O from a homerun cable with Banner Engineering’s new R95 I/O Junction Block. Field devices such as sensors, valves, and lights can be connected to one of eight M12 connectors. Power, ground, and shield are provided to each, while the I/O signals on pins 2 and 4 are connected to their own unique pin on the M23 connector or flying-lead cable exiting the block. This allows users to terminate power, ground, and shield in their control panel along with each I/O point, saving them from making complex wiring junctions or building their own boxes.
FEATURES:
- Rugged overmolded design meets IP65, IP67, and IP68.
- Side-exit ports offer an alternative to common top-exit ports for simplified cable routing.
- Can distribute up to 8 amps to all ports.
- PNP models have diagnostic LEDs for both power and I/O signal status for simplified troubleshooting.
- Models without LEDs can handle both discrete and analog I/O types.
Banner Engineering R95 I/O Junction Block
Banner Engineering Technical Datasheets
