Carlo Gavazzi’s new DCM1 Energy Meter with Ethernet is aimed at the emerging and growing DC metering requirements in Fast Chargers for Electric Vehicles. The DCM1 Series builds on the foundation laid with the DCT1 Series Energy Transducer, by introducing a remote display and an Ethernet port. The remote display can be installed in a part of the charger that is isolated from the high voltage, allowing safe and easy viewing of variables measured. The DCM1 Series can show information about the specific charging session, while being able to receive and process start/stop session commands. Equipped with a built-in Ethernet port, energy measurement information can be transmitted to the charger with Modbus RTU or Modbus TCP protocols.
FEATURES:
- Remote display solution: High current transducer with dual temperature measurement for compensation, integrated DC voltage measurement, self-powered by the display unit to which it communicates via a supplied cable
- Wide measurement range: 150 to 1,000 VDC, 300 A or 600 A max current
- Compactness: 90x115x60 mm transducer housing + 3-DIN display housing
- Fast serial data refresh time: 0.1 Wh resolution class B kWh EN50470-4, also suitable for load emergency disconnection, 200 ms communication refresh time
- Multi-protocols: RS485 Modbus RTU or Ethernet Modbus TCP available to adapt to different charger controllers
Carlo Gavazzi DCM1 Energy Meter with Ethernet
Carlo Gavazzi Technical Datasheets
